digitalage
Senior Member

Location: Earth
|
reason tricks 1: making your own filters
1: create combi
2: use any audio playing device (malstrome, nnxt)
3: create either a master class or a normal Eq (input audio device through it, in otherwords do not use send channels)
4: use the combis modulation system and map the filter freq, q, and strength to rotors 1, 2, and 3)
Now you have a filter that can morph from a lowpass to high pass and anyother filter type you can imagine. You can also change the q so you are not stuck with the 12 and 24 settings of the other filters.
You can also make a line mixer and load two copys of the same device and pattern (along with the trick for each) on the left and right channel alowing you to create a stereo filter witch you can configure with the combi's modulation system.
I will try to figure how to do resonance with this tonite.
Report this post to a moderator | IP: Logged
|